Home Page Product Tour Before/After Photos Hood Cleaners Grease Containment Exhaust Fan Hinge Kits Hood Cleaner Magnets Get Acquainted Kits Install Photos
FAIL (the browser should render some flash content, not this).


Installation Photos

HINGE INSTALLATION

1. Place the open gap up to identify the top of the hinge.

 

2. Slide the hinge to the corner edge of the fan base.

 

3. Tighten the bolt until the hinge starts to spread (1/8 inch). Do not over tighten.

 

4. Tighten the lock nut until snug.

 

5. Apply the 4 self tapping 3/8 inch screws with a drill.

 

6. Install the second hinge.

 

7. Now install the safety chains at the very corner of the fan base.

 

8. Make sure the screw is at the very corner and don't over tighten.

 

9. Now you are ready to lean the fan back and set the safety chain length. Have someone help you with this.

 

10. Make sure you install the screw low enough that the fan doesn't contact the screw when the fan is lowered.

 

11. Repeat the safety chain install on the other side.

 

12. Cut off any excess chain.

 

13. Make sure you install BOTH safety chains. All done.

Home Page Product Tour Before/After Photos Hood Cleaners Grease Containment
Exhaust Fan Hinges Hood Cleaner Magnets Helpful Links Get Aquainted Kits Install Photos

Grease Trap Inc. © 2006